OHMEGA
Back to portfolio

01 · Industrial sensing · Railway applications (R&D)In progress · design and validation

SmartSense — Intelligent Industrial Sensor System

SmartSense explores sensor-chain diagnostics for automated industrial equipment, with potential uses in railway facilities (doors, access points and technical areas) and Industry 4.0. This infrared/ultrasonic laboratory prototype studies how to tell real disturbances from sensor faults.

PROTOTYPE CAD VIEW — IN PROGRESS

CAD rendering generated from the original SmartSense V1 KiCad PCB file. The routed four-layer board is not yet manufactured or physically tested.

ENGINEERING DESIGN DOCUMENTATION

Electronic schematics & PCB layout

Figures derived from KiCad CAD files. These document ongoing design, not photographs of assembled hardware.

01PCB V1 — CAD design overview
02Signal chain — documented functional architecture
03KiCad V1 — overview of 28 hierarchical schematic sheets

28 actual KiCad project sheets, grouped by function for mobile readability.

Power & reference

  • 01 Power Input
  • 02 Power Rails 1
  • 02 Power Rails 2
  • 03 Reference

Infrared chain

  • 04 IR Emitter
  • 05 IR TIA
  • 06 IR Filter
  • 07 IR AntiAlias

Ultrasonic chain

  • 08 US Emitter
  • 09 US Input 1
  • 09 US Input 2
  • 10 US GainFilter
  • 11 US AntiAlias

MCU & service

  • 12 MCU Core
  • 12 MCU
  • 13 MCU AnalogClock 1
  • 13 MCU AnalogClock 2
  • 14 Service

Testing & probes

  • 15 Test 1
  • 15 Test 2
  • 15 Test 3
  • 16_Ground_Probes_1
  • 16_Ground_Probes_2
  • 16_Ground_Probes_3
  • 17_Ground_Probes_1

HMI & interfaces

  • 18_HMI_Power
  • 19_HMI_UART
  • 20_HMI_Connector
04PCB V1 — front copper routing, CAD visualization
05PCB V1 — back copper routing, CAD visualization

Problem

In industrial and railway automation, an unexpected sensor signal may indicate an actual obstruction, interference or degradation of the sensing chain. Confusing these causes can produce false alarms or unreliable diagnostics.

Solution

Develop a laboratory test bench combining modulated infrared and 40 kHz ultrasound, analog signal conditioning and STM32G431 processing. Evaluate which disturbances and sensor failures can genuinely be distinguished using controlled reference measurements before considering an industrial or railway application.

Build path

  1. Specify the laboratory IR and ultrasonic sensing chains.
  2. Design the KiCad hierarchical schematics and route the four-layer PCB.
  3. Develop and host-test the C signal-processing core; compare simulated estimators in MATLAB/Simulink.
  4. Prepare bench measurements for sensor response, disturbances and independent reference checks.

Discussion

Design files and software evidence exist: the design review reports no ERC/DRC violations, 22 C host tests passed, and the ARM target compilation was checked. Fabrication, firmware integration on target and physical characterization are still outstanding. This is not a certified railway or safety device.